Pigeon deterrent measures in Paris 9th: record the perching points
In Paris 9th, pigeons may settle at roof level or around attic dormers where the points are difficult to inspect from the street. Dormers, roof windows, zinc edges, chimney stacks and cornices may be reached through a service staircase leading to a hatch or opening. The survey is made only from areas where a person can stand safely. Anything out of reach is reported rather than guessed.
The roof and its edges are usually shared building structures, so any deterrent measure must be considered with the syndic. We describe the point of access, the support and the possible protection, but we do not fix anything to a common structure without approval. A measure may limit one identified perching point while leaving another available. No device is presented as a definitive guarantee against return or neighbouring perches.
- Record visible perching points
- Describe roof-level access
- Distinguish shared structures
- Set out possible protections
Organising a survey of pigeon perching points
From the top floor
- Inspect accessible dormers
- Record visible roof windows
- Check available hatches
- Describe reachable areas
Around the roof
- Note zinc edges
- Identify chimney stacks
- Observe accessible cornices
- Separate common structures
Before considering protection
- Request the syndic’s approval
- Describe the proposed support
- Report inaccessible sections
- Explain device limitations
Perching points at roof level and in the attic dormers
In Paris 9th, pigeon perching points are often found above the ordinary line of sight, around the top floor and roof. Attic dormers, roof windows, zinc edges, chimney stacks and cornices can offer resting positions that are not visible from the flat entrance or from the street below. Access may be through a service staircase leading to a dormer or hatch, followed by an observation from the area where a person can stand safely. Reaching one opening does not mean that the adjoining roof edge or cornice can also be reached. A slope, parapet, covering, technical element or low passage may prevent a complete view. We therefore record each point separately, with its position, visible condition and access route. A dormer may be accessible from inside the attic while a nearby zinc edge remains out of reach. A chimney stack may be visible but require a separate decision because of its support and location. A cornice may be seen from a safe position without being suitable for direct approach. The survey does not fill gaps by assumption. It distinguishes the points actually observed from areas that remain hidden or inaccessible. This gives the syndic and the building’s responsible parties a clearer basis for considering possible protection. The work concerns identified perching points and potential measures, not a promise that every roof area has been inspected or covered.
The roof and its edges are shared building structures, even when they sit directly above a private flat or attic room. Any deterrent installation on a common support must therefore be considered with the syndic and carried out only within the approval given. We do not fix equipment to a roof edge, cornice, chimney stack or other common structure without that agreement. The possible measure depends on the support, its condition, the access route and the exact point where birds settle. We cannot guarantee that pigeons will not return or that a nearby ledge, edge or neighbouring support will not be used. A device may reduce access to one point while leaving another route available or encouraging birds to settle elsewhere. No installation is presented as a definitive guarantee. Sections that cannot be reached from the authorised position are reported with their location and remain outside the detailed survey. The description also separates what is visible from inside the attic from what would require access to the roof itself. This allows decisions to be taken on a defined common structure rather than on a general assumption about the whole building.
A method for recording and considering deterrent measures
Collect the observations
We begin by recording where pigeons are seen resting around dormers, roof windows, zinc edges, chimney stacks and cornices.
Reach the top-floor access
We follow the service staircase to the accessible dormer or hatch, taking account of the available footing and route.
Observe from a safe position
The survey is made from an area where a person can stand safely, without moving towards a section that cannot be reached.
Name each structure
Roof edges, stacks, cornices, dormers and supports are described separately so their position and status remain clear.
Check the common-property status
We identify structures that belong to the shared roof and refer any fixing or protection decision to the syndic.
Set out the limits
The possible measures and inaccessible areas are recorded without promising that pigeons will not return or use another support.
The criteria examined for pigeon deterrent work
- Nature of the perching point
- Attic or roof access
- Dormer or hatch present
- Zinc edge condition
- Chimney stack position
- Cornice visibility
- Shared roof structure
- Syndic approval required
The survey considers perching points visible at top-floor and roof level, including dormers, roof windows, zinc edges, chimney stacks and cornices. Each point is described according to its location, access and the position from which it can be observed safely. Roofs and edges are shared structures, so the syndic’s approval is required before any fixing or protection. Areas that cannot be reached are reported and remain outside the detailed survey. Possible measures are presented with their limits, without guaranteeing that pigeons will not return or use a neighbouring support.
Related pages in Paris 9th
This page concerns the survey of perching points and possible protections; removal of existing droppings belongs to the pigeon-droppings-cleaning page and a separate service.
Frequently asked questions about pigeon deterrent measures
Which roof-level points can be surveyed?
We may record attic dormers, roof windows, zinc edges, chimney stacks and cornices when they are visible from an accessible position. Each point is described separately, with its route and practical limits.
Does the service staircase reach the whole roof?
No. It may lead to a dormer or hatch, but slopes, coverings, low passages or technical structures can leave other edges out of reach. Those sections are reported and are not described as inspected.
Who approves protection fixed to the roof?
The syndic must approve work on the roof and its edges because they are shared building structures. We can describe the support and possible measure, but we do not fix anything to a common structure without that approval.
Can a deterrent stop pigeons returning completely?
No. A device may limit one identified perching point, while birds may use another edge, ledge or neighbouring support. The possible protection is therefore described with its practical limits and without a definitive promise.
Can a cornice visible from the attic be protected?
It depends on its access, support and status. If the cornice is shared, the syndic’s decision is required before fixing anything, even where the point can be seen from inside the attic.
Is removal of existing droppings included?
No. This page concerns the survey of perching points and possible deterrent measures. Existing droppings are dealt with through a separate cleaning service and require their own surface assessment.
What happens when a point cannot be reached?
We record its location and explain why it remains inaccessible. An unreachable area is not presented as protected or surveyed, and it stays outside the detailed measure until an authorised access route is defined.
Report the perching points visible from inside
From the contact page, choose Request a quote or Contact us to describe the dormers, hatches, roof edges and other visible perching points.